Apple2.gs Forums: General » Dust cover advice?

Home » Apple IIgs Programming » General » Dust cover advice?

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

Dust cover advice? [message #81]

Sun, 29 March 2015 02:09

kaltwach
Messages: 1
Registered: September 2014
Location: Oregon

Poster

Hi,

I have a IIgs sitting in my office that I work on very occasionally and it occurred to me recently I should probably have some kind of dust cover. I know you can probably still buy generic CRT dust covers, usually made from some kind of vinyl material. Any thoughts on whether it is necessary to have a cover made out of plastic? I was thinking something made out of fabric might be nicer, and more environmentally friendly, but would be a bit concerned about possible effects of static electricity.

Thanks,

Chris

Report message to a moderator

Re: Dust cover advice? [message #91 is a reply to message #81]

Tue, 01 March 2016 09:50

Dagen
Messages: 27
Registered: August 2014
Location: United States

Member

I have seen fabric dust covers and even knitted/crocheted ones. I'm assuming it's not harmful for the machine because computers are built with some tolerance to external static. It's inside the machine where static can do real damage. That said, I'd only put on or take off the cover while the PSU is plugged into an outlet. Any discharge would then hopefully be able to safely exit via the ground wire of the plug.

Report message to a moderator

Previous Topic:	Snow - Winter Micro Demo
Next Topic:	Hi everyone, New here with an Apple IIGS

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Feb 05 12:02:59 MST 2025

Total time taken to generate the page: 0.01022 seconds