Apple2.gs Forums
Discussions for Apple IIgs Programming and other fun stuff. // Infinitum!

Home » Apple IIgs Programming » General » Hi everyone, New here with an Apple IIGS
Hi everyone, New here with an Apple IIGS [message #89] Mon, 29 February 2016 12:29 Go to next message
Tonyvdb is currently offline  Tonyvdb
Messages: 3
Registered: February 2016
Location: Edmonton Canada
Poster
Hi everyone, I just signed up here because I have acquired an Apple IIGS for $50 and I want to get this guy up and running. Its a WOZ edition ROM 01
It has no added cards or extras under the hood and only came with a 5.1/4" floppy drive.

A little about me: I grew up in Jr high and Highschool playing/using the Apple IIe and owned one for years at home in the 80s I have not used one since the early 90s but want to get back into it without spending alot of money.
I have been an owner of two Amigas; an A4000D that Ive placed in a tower case along with a Video Toaster/Flyer system that still works today and a A2000 thats just used to play games on with the kids.

So my question is how do I get games to run on my IIGS given I dont have any 5.1/4" disks? I know Ive seen many placed that have the disk images of many of my favorite Apple games.

Tony


Amiga 4000D in a Tower
Amiga 2000
Apple IIGS WOZ edition
Re: Hi everyone, New here with an Apple IIGS [message #90 is a reply to message #89] Tue, 01 March 2016 09:46 Go to previous messageGo to next message
Dagen is currently offline  Dagen
Messages: 27
Registered: August 2014
Location: United States
Member

Hi Tony,

Unfortunately, most IIgs software requires a 3.5" drive, or hard disk. However, one of the coolest parts of the Apple IIgs is the extremely high level of backward compatibility with the earlier 8-bit Apple IIs. So if you can get some 5.25" disk, by all means do, and then fill them up with older Apple II games.

If you did have floppies, the first/best way to transfer disk images over is using a program called ADTPro. It runs on all modern OSes (under Java) and allows you to transfer via serial cable or ethernet (or audio on earlier Apple IIs with a cassette jack.Wink If you need cables, the ADTPro page lists some.

Also, if you need floppies, check out http://retrofloppy.com. He's a good dude and regularly supplies Apple II floppies.

For a hard drive, you'd need a SCSI card, which aren't too hard to find, but then you also need an old-school SCSI drive.
A much better option is to use one of the modern, solid-state storage solutions. I'm enamored with the CFFA3000. What's really awesome about it, is that it emulates hard drives, AND 3.5"/5.25" floppy drives. You can just download disk/HD images from the internet and copy them to your CF card or USB thumbstick and put it in the CFFA3000 and you will be quite happy!

Another solid-state option is the Microdrive IDE Turbo, which I use with a CF card. I just recently got one and am still playing around with it, so I can't compare it yet, but I think I may prefer the CFFA ever-so-slightly more. But the people that make the Microdrive are awesome and make a lot of very useful add-ons.

Speaking of, if it has no memory card, you will need one to run almost all Apple IIgs hardware. I'd recommend a minimum of 2megs, but most new cards are 4 or 8 megs because there's not any point in making a smaller version with the cost of those DRAM chips these days.




Here are some of the current hardware vendors I've ordered from, all very nice and dedicated folks:
Ultimate Micro (aka UltimateApple2)
A2Heaven
Nishida Radio


By the way, if you're wondering why an Apple IIgs would come so stripped down as yours and unable to run the cooler 16-bit games, one explanation is that it could've been one of many systems sold into schools to basically act as a replacement for the earlier 8-bit Apple II systems. So if you had a box of Apple IIe games, you'd probably have no problems running 100% of them as is.
Re: Hi everyone, New here with an Apple IIGS [message #92 is a reply to message #90] Tue, 01 March 2016 10:13 Go to previous messageGo to next message
Tonyvdb is currently offline  Tonyvdb
Messages: 3
Registered: February 2016
Location: Edmonton Canada
Poster
Ok thanks, so I have gotten my hands on an Apple 3.5" floppy drive that I should have in a few days and I also got a bunch of new 800k 3.5" floppies. Will I be able to use them on my PC to get the game image files onto the disks?

Amiga 4000D in a Tower
Amiga 2000
Apple IIGS WOZ edition
Re: Hi everyone, New here with an Apple IIGS [message #94 is a reply to message #92] Wed, 02 March 2016 18:21 Go to previous messageGo to next message
Dagen is currently offline  Dagen
Messages: 27
Registered: August 2014
Location: United States
Member

I don't think you can copy them from any PC drives. I know there are a couple of older (Power PC era) Macs that can format and write 800k floppies for the Apple II. You might see if there's any way to do it from one of your Amigas, but I don't believe so.

I think the best option for you is to find a serial cable and use that to bootstrap with ADTPro. It's really simple, and if your PC doesn't have a serial port I think you can pick up a small USB-to-RS232 adapter.

Here's an old video that shows how easy it is once you get the cable. https://www.youtube.com/watch?v=1xworYThmMI

And again, you can find more info at the ADTPro project page. http://adtpro.sourceforge.net/

Info about the right cables to use can be found here. http://retrofloppy.com/products.html
Re: Hi everyone, New here with an Apple IIGS [message #95 is a reply to message #94] Thu, 03 March 2016 20:23 Go to previous messageGo to next message
Tonyvdb is currently offline  Tonyvdb
Messages: 3
Registered: February 2016
Location: Edmonton Canada
Poster
Ok, I'll use the bootstrap way.
One final question, can I place the game disk image files on 3.5" disks or will they only work on 5 1/4" disks"


Amiga 4000D in a Tower
Amiga 2000
Apple IIGS WOZ edition
Re: Hi everyone, New here with an Apple IIGS [message #98 is a reply to message #95] Mon, 18 April 2016 16:01 Go to previous messageGo to next message
damauk is currently offline  damauk
Messages: 5
Registered: April 2016
Location: Riverton, WY
Contributor
The easiest way to get software to the IIGS is using ADTPRO. I cannot answer your question about the 140k image on an 800k disk, but I would suggest you get your hands on some 5 1/4" floppies.

I have ordered both 5 1/4 and 3.5 disks some from the following location: http://retrofloppy.com/products.html

I can try installing a 140k disk image on an 800k disk if you haven't tried yet, just let me know.
Re: Hi everyone, New here with an Apple IIGS [message #102 is a reply to message #89] Sun, 05 June 2016 18:24 Go to previous messageGo to next message
brian is currently offline  brian
Messages: 1
Registered: June 2016
Location: Central KY
Poster
With regards to ADTPro and the IIGS, I've had pretty bad luck trying to use a regular serial cable (8-pin mini DIN to 9-pin DB9). With 2 different chipset USB-DB9 adapters on two different laptops, one cable won't work at all while the other cable works fine to bootstrap the disk over but fails completely to work most other times. I've had much greater success using a Super Serial Card in my GS (as well as my IIe). ADTPro web site has good info on how to setup, but in case the jumper plug is missing (like one of my SSCs) I'll be happy to post a photo of the internals of the plug. Pretty simple to build once you see it.
Re: Hi everyone, New here with an Apple IIGS [message #105 is a reply to message #95] Thu, 06 October 2016 14:48 Go to previous messageGo to next message
RCJim is currently offline  RCJim
Messages: 1
Registered: October 2016
Location: Midwestern River City
Poster
Hi Tony,

About your question on putting/moving programs and/or disks from 5.25" disks to 3.5 disks, that varies, depending upon what Apple II operating system any programs require to operate.

On Apple II's, the main programs are DOS 3.3 (Disk Operating System - the second or so OS under which disks for Apple II's would be formatted - I won't get into 13-sector DOS, which others can correct me, but I think were DOS 3.2 maybe), and ProDOS (see Dr. Steve Weyhrich's page on DOS and the Disk ][ drives - aka Disk II drives - here: apple2history.org/history/ah15/

Big differences are, under DOS 3.3, a disk that was formatted has the boot code to start up an Apple II (and some have startup programs which will then run (sort of like a PC hard drive under Windows that may have a program on it which autostarts if it's the boot drive). Under ProDOS, the disk doesn't automatically have any operating system on it; those disks will show an error message about being unable to load the ProDOS.SYSTEM file (or other System file -, another ProDOS difference from DOS 3.3).

Actually, Dr. Steve's site (Apple II History -apple2history.org - can fill you in and answer a lot of questions about Apple II's, Apple II disk drives of various forms, and a lot more. He has an excellent book version of the site as well, if you'd prefer an "analog" version... Wink

Short version is that on Apple II's, as on PC disks, you can have 'data' disks, as well as disks with operating system(s) on them (aka 'boot' disks). To boot up, you need (using ADT2Pro, as was already mentioned) to transfer an Apple II version of ADTPro from another computer (a PC in your case, right?Wink across the cable to the Apple IIgs, and then that Apple II (ADTPro) program can help move the operating system and/or disk contents over the cable to your diskettes on the IIgs (whether 3.5 or 5.25 inch size). The other members also are accurate in mentioning that having a CFFA or IDE MicroDrive or a (SCSI) hard drive will be something well worth the time and money. Ask someone here about the good ol' "Floppy shuffle"... (where you need to run a program or - worse yet - make a copy of a disk - with only ONE (5.25 or 3.5 inch) disk drive. Teeeedious!!

ADTPro would be the way to go, and if you can get a second 3.5 inch drive (and that extra RAM others mentioned) or hard rive, that/those will help a bunch! You will thank yourself multiple times for putting the money toward the second (or digital) drive and the RAM upgrades.

Do take a look at Dr. Weyhrich's Apple II History site (or just buy the book), though.

Hope that helps some for you,

River City Jim
Re: Hi everyone, New here with an Apple IIGS [message #111 is a reply to message #105] Fri, 30 March 2018 07:32 Go to previous message
handyandy is currently offline  handyandy
Messages: 3
Registered: February 2018
Location: Virginia USA
Poster
Hi all,

I am also new here with an Apple IIGS ROM 3 that I acquired for more than $50 (add a zero). I've had a Laser 128EX for many years now that I used in college. I installed a 4 Mhz 65802 in it along with 1 Mbyte ram for slinky solid state disk drive. Back in the day I used a modem to connect to the internet and Imagewriter II with 32 kbyte buffer for printing. I always felt hampered by the 64K or 128K memory limit. I rather quickly acquired an IDE microdrive and GGLabs 8 Megabyte ram expansion card and am now ready to rock and roll.

Cheers!
Andy
Previous Topic: Dust cover advice?
Goto Forum:
  


Current Time: Wed Feb 05 12:07:14 MST 2025

Total time taken to generate the page: 0.00943 seconds